Cisco IDS 4210 10/100 SENSOR Specification Guide
11
Checklist for Initial Sensor Setup
6
Products You Can Use to Configure Your Sensor
IDS Device Manager
IDS Device Manager is a web-based application that allows you to configure and manage your IDS
sensor. The web server for IDS Device Manager resides on the sensor. Using secure HTTP, you can
access it through Netscape or Internet Explorer web browsers by typing in the IP address of the sensor.
The default web server port is 443. If you change the web server port, you must specify the port in the
URL address in the format https://sensor ip address:
sensor. The web server for IDS Device Manager resides on the sensor. Using secure HTTP, you can
access it through Netscape or Internet Explorer web browsers by typing in the IP address of the sensor.
The default web server port is 443. If you change the web server port, you must specify the port in the
URL address in the format https://sensor ip address:
port
when you connect to IDS Device Manager
(for example, https://10.1.9.201:1040).
Information You Need
Value
For the Sensor (initial settings):
Hostname (case-sensitive; default is sensor)
IP Address (address of sensor; default is 10.1.9.201)
Network Mask (default for Class C is 255.255.255.0)
Default Route (default gateway is 10.1.9.1)
Enable Telnet services? (default is disabled)
Web Server Port (default is 443)
For All Hosts Allowed to Connect to Sensor (this includes
monitoring applications, like the IDS Event Viewer):
monitoring applications, like the IDS Event Viewer):
IP Address
Network Mask
For All SSH Client Connections to Sensor:
IP Address
Key Modulus Length
Public Exponent
Public Modulus
For All TLS (Web Server) Connections to Sensor:
IP Address of Host with x.509 certificate