Cisco CATALYST 4510R 10 SLOT CHASSIS WITH FAN TRAY Specification Guide
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 10 of 15
FAN TRAYS
Each Cisco Catalyst 4500 Series chassis uses a single fan tray for cooling. All fan trays are composed of independent fans. If one fan fails, the system
will continue to operate without a significant degradation in cooling. The system will detect and notify the user (through LED, command-line
interface [CLI], and SNMP) that a fan has failed and the tray needs to be replaced.
FABRIC-REDUNDANCY MODULES (CISCO CATALYST 4507R AND 4510R ONLY)
The Cisco Catalyst 4500 Series redundancy scheme uses removable fabric-redundancy modules on the passive backplane to switch traffic to the
active supervisor engine. There is one fabric-redundancy module per line card. Fabric-redundancy modules and redundant clocks ship standard with
every Cisco Catalyst 4507R and 4510R chassis. Spare fabric-redundancy modules and clock modules are available for serviceability.
ENVIRONMENTAL CONDITIONS
The Cisco Catalyst 4500 Series requires the following conditions:
•
Operating temperature: 32 to 104ºF (0 to 40ºC)
•
Storage temperature: –40 to 167ºF (–40 to 75ºC)
•
Relative humidity: 10 to 90 percent, noncondensing
•
Operating altitude: –60 to 2000 meters (m)
REGULATORY STANDARDS COMPLIANCE
Table 9 lists the regulatory standards compliance of the Cisco Catalyst 4500 Series.
Table 9. Regulatory Standards Compliance
Specification
Standard
Regulatory Compliance
•
CE marking
Safety
•
UL 60950
•
CAN/CSA-C22.2 No. 60950
•
EN 60950
•
IEC 60950
•
TS 001
•
AS/NZS 3260
EMC
•
FCC Part 15 (CFR 47) Class A
•
ICES-003 Class A
•
EN55022 Class A
•
CISPR22 Class A
•
AS/NZS 3548 Class A
•
VCCI Class A
•
EN 55022
•
EN 55024
•
EN 61000-6-1
•
EN 50082-1
•
EN 61000-3-2
•
EN 61000-3-3
•
ETS 300 386