Cisco 2600 2 PORT WAN ASYNC/SYNC SERIAL MODULE Specification Guide
Components Used
The information in this document is based on the WIC−2A/S.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Product Number
WIC−2A/STwo−Port Asynchronous/Synchronous WIC
Features
The WIC−2A/S provides two serial ports using the Smart Serial connector.
Aysnchronous support with a maximum speed of 115.2 Kbps and a minimum of 600 bps. If you need
to run at speeds lower than 600 bps, use the AUX port instead.
to run at speeds lower than 600 bps, use the AUX port instead.
•
Synchronous support with a maximum speed of 128 Kbps.
•
Cables
Cable Type
Product Number
Length
Male/Female
V.35 DTE
CAB−SS−V35MT(=)
10 feet / 3
meters
meters
Male
V.35 DCE
CAB−SS−V35FC(=)
10 feet / 3
meters
meters
Female
RS−232
DTE
DTE
CAB−SS−232MT(=)
10 feet / 3
meters
meters
Male
RS−232
DCE
DCE
CAB−SS−232FC(=)
10 feet / 3
meters
meters
Female
RS−449
DTE
DTE
CAB−SS−449MT(=)
10 feet / 3
meters
meters
Male
RS−449
DCE
DCE
CAB SS−449FC(=)
10 feet / 3
meters
meters
Female
X.21 DTE
CAB−SS−X21MT(=)
10 feet / 3
meters
meters
Male
X.21 DCE
CAB−SS−X21FC(=)
10 feet / 3
meters
meters
Female
EIA−530
DTE
DTE
CAB−SS−530MT(=)
10 feet / 3
meters
meters
Male
Cisco − 2−Port Async/Sync WAN Interface Card (WIC−2A/S)