Nikon D750 Kit Owner's Manual

288

❚❚ Terminating the Connection

Wi-Fi can be disabled by:
• Selecting Wi-Fi > Network connection > Disable in the 

camera setup menu

• Starting movie recording
• Connecting an optional UT-1 communication unit
• Turning the camera off

❚❚ Restoring Default Settings

To restore default network settings, select Wi-Fi > Network 
settings > Reset network settings. A confirmation dialog will 
be displayed; highlight Yes and press 

J to restore default 

network settings.

A

While Wi-Fi is enabled, a 

g icon will flash in 

the control panel. The icon will stop 
flashing once a connection has been 
established and the camera is exchanging 
data with the smart device.

D

Read the warnings on pages xxiv to xxvi before using the Wi-Fi 
function. To disable Wi-Fi in settings in which its use is prohibited, 
select Wi-Fi > Network connection > Disable in the camera setup 
menu. Note that Eye-Fi cards can not be used while Wi-Fi is enabled 
and that the standby timer will not turn off while the Wireless Mobile 
Utility app on the smart device is communicating with the camera. If 
no data are exchanged for about 5 minutes, the standby timer will turn 
off. The camera Wi-Fi function is only available when a memory card is 
inserted and can not be used when a USB or HDMI cable is connected. 
To prevent loss of power while connected, charge the battery before 
enabling the network connection.