Canon EOS 5D Mark III Standard Zoom Lens Kit Owner's Manual
147
Peripheral light fall-off occurs in lenses whose characteristics make the
image corners look darker. Color fringing along subject outlines also is a
chromatic aberration. Light fall-off and color fringing can be corrected.
The default setting is [Enable] for both corrections.
image corners look darker. Color fringing along subject outlines also is a
chromatic aberration. Light fall-off and color fringing can be corrected.
The default setting is [Enable] for both corrections.
1
Select [Lens aberration
correction].
correction].
Under the [z1] tab, select [Lens
aberration correction], then press
<
aberration correction], then press
<
0>.
2
Select the setting.
Check that [Correction data
available] is displayed for the
attached lens.
available] is displayed for the
attached lens.
Turn the <5> dial to select
[Peripheral illumin.], then press
<
[Peripheral illumin.], then press
<
0>.
Select [Enable], then press <
0>.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on page 149.
displayed, see “About the Lens
Correction Data” on page 149.
3
Take the picture.
The image will be recorded with the
peripheral illumination corrected.
peripheral illumination corrected.
3
Lens Peripheral Illumination / Chromatic Aberration Correction
Peripheral Illumination Correction
Depending on shooting conditions, noise may appear on the image periphery.
The correction amount applied will be slightly lower than the maximum
correction amount settable with Digital Photo Professional (provided
software).
correction amount settable with Digital Photo Professional (provided
software).
The higher the ISO speed, the lower the correction amount will be.