Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
3
Customizing AF FunctionsN
148
You can set either to stop the selection at the outer edge or it can cycle
around to the opposite side in AF point selection.
around to the opposite side in AF point selection.
: Stops at AF area edges
Useful if you often use an AF point
along the edge.
along the edge.
: Continuous
Instead of stopping at the outer edge,
the selection of AF point continues to
the opposite side.
the selection of AF point continues to
the opposite side.
2
5
AF point selection movement
AF5
If [EOS iTR AF (Face priority)] or [EOS iTR AF] is set, the camera may
take longer to focus than when [Disable] is set.
take longer to focus than when [Disable] is set.
Even if you set [EOS iTR AF (Face priority)] or [EOS iTR AF], the
expected effect may not be obtained depending on the shooting
conditions and subject.
expected effect may not be obtained depending on the shooting
conditions and subject.
Under light so low that the EOS-dedicated, external Speedlite emits the
AF-assist beam automatically, AF points are selected automatically
based only on AF information.
AF-assist beam automatically, AF points are selected automatically
based only on AF information.
Face detection may not work if the face is small or under low-light
conditions.
conditions.
With [24: Initial AF pt,
AI Servo AF] set to [Initial
AF
pt
selected], the above setting will also work when you are selecting the initial
AF point for AI Servo AF.
AF point for AI Servo AF.