Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual

231

To acquire GPS signals, take the camera outside where the sky is 
unobstructed. Face the top of the camera toward the sky while keeping 
your hands, etc. away from the camera top.
When the signal acquisition conditions are good, it will take the camera 
approx. 30 sec. to 60 sec. to acquire the GPS satellite signals after you 
set [GPS] to [Mode 1] or [Mode 2]. Check that [r] is displayed on 
the LCD panel, then shoot.

 

Under the [54] tab, select [GPS 
settings], then press <0>.

 

Select [Mode 1] or [Mode 2].

X

[r] will be displayed on the LCD 
panel.

 

Mode 1
The camera will continue to receive GPS signals at regular intervals 
even when the power switch is set to <1> or <2>.

 

Mode 2
When the power switch is set to <1>, the camera will receive 
GPS signals. When the power switch is set to <2>, the GPS 
function will also turn off. However, if auto power off is in effect, the 
camera will continue to receive GPS signals at regular intervals.