Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
237
The time information obtained from GPS signals can be set on the
camera. The margin of error is approx. ±1 sec.
camera. The margin of error is approx. ±1 sec.
1
Check the [GPS] setting.
Check that [GPS] is set to [Mode 1]
or [Mode 2].
or [Mode 2].
2
Select [Auto time setting].
3
Select the desired setting.
Select [Auto update] or [Set now],
then press <0>.
then press <0>.
[Auto update] updates the time when
the camera’s power switch is on and
a GPS signal is received.
the camera’s power switch is on and
a GPS signal is received.
Setting Time from GPS on the Camera
If signals from at least five GPS satellites cannot be acquired, the time
cannot be auto updated. [Set now] will be grayed out and not selectable.
cannot be auto updated. [Set now] will be grayed out and not selectable.
Even if [Set now] can be selected, updating the time may not be
possible due to an unfavorable timing of the GPS signal acquisition.
possible due to an unfavorable timing of the GPS signal acquisition.
When [Auto time setting] is set to [Auto update], the date or time
cannot be manually set with [52: Date/Time/Zone].
cannot be manually set with [52: Date/Time/Zone].
If you use Wireless File Transmitter WFT-E7 (Ver. 2/sold separately) and
do not want to change the time after implementing [Sync time between
cameras], set [Auto time setting] to [Disable] in step 2.
do not want to change the time after implementing [Sync time between
cameras], set [Auto time setting] to [Disable] in step 2.