Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
279
You can connect any EOS accessory equipped with an N3-type terminal
such as the Remote Switch RS-80N3 or Timer Remote Controller TC-
80N3 (each sold separately) to shoot with the camera (p.525).
To operate the accessory, refer to its Instruction Manual.
such as the Remote Switch RS-80N3 or Timer Remote Controller TC-
80N3 (each sold separately) to shoot with the camera (p.525).
To operate the accessory, refer to its Instruction Manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
control terminal.
Connect the plug as shown in the
illustration.
illustration.
To disconnect the plug, grasp the
silver part and pull it out.
silver part and pull it out.
Using a Remote Switch
R
Remote Control Shooting
With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
away from the camera (when you are facing the front
of the camera). You can either shoot immediately or
with a 2-sec. delay.
can shoot remotely up to approx. 5 meters/16.4 feet
away from the camera (when you are facing the front
of the camera). You can either shoot immediately or
with a 2-sec. delay.
1
Focus on the subject.
2
Set the lens’s focus mode switch
to <MF>.
to <MF>.
You can also shoot with <f>.
3
Press the <o> button
(9)
.