Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual

367

3

 Setting the Time Code

 

Time code
The time code can be appended to a movie that is output via HDMI.
Enable: Appends time code to HDMI video output. When [Enable] 

is set, [Rec Command] will be displayed.

Disable: Time code not appended to HDMI video output.

 

Record command
When a video output via HDMI is recorded by an external recording 
device, the camera’s movie shooting start and stop can sync with the 
recording by an external recording device.
Enable: The movie shooting start and stop sync with the recording 

by an external recording device.

Disable: The recording start and stop are controlled by the external 

recording device.

 

During High Frame Rate movie shooting, when outputting a movie via 
HDMI with [Count up] in [Time code] set to [Free run], the time code 
will not be appended to the HDMI video output.

 

To check whether your external recording device is compatible with the 
[Time code] or [Rec Command], consult the manufacturer of the 
external recording device.

 

Even if you set [Time code] to [Disable], time code may be appended to 
the movie depending on the specifications of the external recording 
device. For specifications of time code for HDMI input, consult the 
manufacturer of the external recording device.