Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
d
Transferring Images to a Computer
468
Selecting Images
1
Select [Image transfer].
Under the [32] tab, select [Image
transfer], then press <0>.
transfer], then press <0>.
2
Select [Image sel./transfer].
3
Select [Sel.Image].
4
Select the images to be transferred.
Turn the <5> dial to select the image
to be transferred, then press <0>.
to be transferred, then press <0>.
Turn the <5> dial to display the [X]
on the upper left of the screen, then
press <0>.
on the upper left of the screen, then
press <0>.
If you press the <u> button and turn
the <6> dial counterclockwise, you
can select an image from a three-image
display. To return to the single-image
display, turn the <6> dial clockwise.
the <6> dial counterclockwise, you
can select an image from a three-image
display. To return to the single-image
display, turn the <6> dial clockwise.
To select another image to be
transferred, repeat step 4.
transferred, repeat step 4.
3
Selecting the Images to be Transferred
When [Sel.Image] is selected, you can check the image’s transfer status
on the upper left of the screen: No mark: Not selected. X: Selected for
transfer. l: Transfer failed. k: Transfer succeeded.
on the upper left of the screen: No mark: Not selected. X: Selected for
transfer. l: Transfer failed. k: Transfer succeeded.
The procedures for [RAW+JPEG transfer] (p.467) and steps 1 to 4
above can also be performed even if the camera is not connected to a
computer.
above can also be performed even if the camera is not connected to a
computer.