Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
61
This is a connection mode available when using an access point
compatible with WPS. In pushbutton connection mode (PBC mode), the
camera and the access point can be connected simply by pressing the
WPS button on the access point.
compatible with WPS. In pushbutton connection mode (PBC mode), the
camera and the access point can be connected simply by pressing the
WPS button on the access point.
If multiple access points are active in the surrounding area, it may be
more difficult to establish a connection. In such a case, try using
[WPS (PIN mode)] to establish a connection.
more difficult to establish a connection. In such a case, try using
[WPS (PIN mode)] to establish a connection.
Check the position of the WPS button on the access point in
advance.
advance.
It may take approx. one minute to establish a connection.
1
Select [Communication settings].
Under the [54] tab, select
[Communication settings], then
press <0>.
[Communication settings], then
press <0>.
2
Select [Built-in wireless settings].
3
Select [Wi-Fi function].
Set [Wi-Fi/NFC] to [Enable], then
select [Wi-Fi function] (p.20).
select [Wi-Fi function] (p.20).
Connecting via WPS (PBC Mode)