Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
70
Connecting to a Network Manually
5
Select [Select a network].
Displayed when [q], [D], or [l] is
selected in step 4. Go to step 6 when
selecting [r] or [w].
selected in step 4. Go to step 6 when
selecting [r] or [w].
Select [OK] and press <0> to go to
the next screen.
the next screen.
6
Select an access point.
Use <5> or <9> to select the
access point to connect to from the
list of access points.
access point to connect to from the
list of access points.
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 6 to display [Refresh] and [Manual
settings].
settings].
To search for access points again, select [Refresh].
To configure settings for the access point manually, select [Manual
settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
(1)
(2) (3)
For [Camera access point mode] displayed in step 6, see page 74.