Sony XBR-65X930E Owner's Manual

Page of 46
3
US
D:\_SONY TV\SY160179_KP UC2 RG\4690457111_US\010COVTOC.fm
masterpage: Right
XBR-75X940E / 65X930E / 55X930E
4-690-457-11(1)
US
FCC Related Information
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and 
receiver.
• Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician 
for help.
Safety and Regulatory
This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following two 
conditions: 
 
(1) This device may not cause interference; and 
 
(2) This device must accept any interference, including 
interference that may cause undesired operation of the 
device.
To prevent radio interference to the licensed service, this 
device is intended to be operated indoors and away from 
windows to provide maximum shielding. Equipment (or its 
transmit antenna) that is installed outdoors is subject to 
licensing.
5 GHz bands are restricted to indoor operations only.
This equipment complies with FCC/IC radiation exposure 
limits set forth for an uncontrolled environment and meets 
the FCC radio frequency (RF) Exposure Guidelines and 
 
RSS-102 of the IC radio frequency (RF) Exposure rules. This 
equipment should be installed and operated keeping the 
radiator at least 20cm or more away from person’s body 
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or 
operating with any other antenna or transmitter except 
Grant condition.
High-power radars are allocated as primary users (i.e. 
priority users) of the bands 5250-5350 MHz and 5650-
 
5850 MHz and that these radars could cause interference 
and/or damage to LE-LAN devices.
WARNING
Never place a television set in an unstable location. A 
television set may fall, causing serious personal injury or 
death. Many injuries, particularly to children, can be 
avoided by taking simple precautions such as:
 Using cabinets or stands recommended by the 
manufacturer of the television set.
 Only using furniture that can safely support the television 
set.
 Ensuring the television set is not overhanging the edge 
of the supporting furniture.
 Not placing the television set on tall furniture (for 
example, cupboards or bookcases) without anchoring 
both the furniture and the television set to a suitable 
support.
 Not placing the television set on cloth or other materials 
that may be located between the television set and 
supporting furniture.
 Educating children about the dangers of climbing on 
furniture to reach the television set or its controls.
If your existing television set is being retained and 
relocated, the same considerations as above should be 
applied.
NOTE ON AC ADAPTER (models with 
supplied AC adapter only)
Warning
To reduce the risk of fire or electric shock, do not expose 
this apparatus to rain or moisture.
 
To prevent fire or shock hazard, do not place objects filled 
with liquids, such as vases, on the apparatus.
 
Do not install this equipment in a confined space, such as a 
bookshelf or similar unit.
• Please ensure that the AC power outlet is installed near 
the equipment and shall be easily accessible.
• Be sure to use the supplied AC adapter and AC power 
cord. Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power 
outlet.
• Do not coil the AC power cord 
around the AC adapter. The 
core wire may be cut and/or 
it may cause a malfunction of 
the TV.
 
 
 
• Do not touch the AC adapter with wet hands.
• If you notice an abnormality in the AC adapter, disconnect 
it from the AC power outlet immediately.
• The set is not disconnected from the AC source as long as 
it is connected to the AC power outlet, even if the set 
itself has been turned off.
• As the AC adapter will become warm when it is used for a 
long time, you may feel hot when touching it by hand.
Compatible Wall-Mount Bracket 
Information (XBR-75X940E, XBR-65X930E 
only)
Use the following Sony Wall-Mount Bracket with your TV 
model.
Use with other Wall-Mount Brackets* may cause instability 
and could result in property damage or injury.
* For instructions on using the Wall-Mount bracket with 
your TV please go to http://esupport.sony.com for your TV 
model and download “Additional Information for Using 
Sony Wall-Mount Bracket”.
Safety information
Declaration of Conformity
Trade Name: SONY
Model: XBR-75X940E/XBR-65X930E/XBR-55X930E
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.
Pursuant to FCC regulations, you are cautioned that any 
changes or modifications not expressly approved in this 
manual could void your authority to operate this 
equipment.
Sony TV Model No.
XBR-75X940E/XBR-65X930E
Sony Wall-
Mount 
Bracket 
Model No.
SU-WL830