Scosche SAH6 Speaker Mounting Brackets Owner's Manual
1. Place speaker adaptor bracket on speaker
location. Use bracket as a template to mark new
mounting holes.
mounting holes.
2. Remove bracket and drill new holes with a 1/8” bit.
3. Secure brackets to location with screws supplied.
4. Make speaker wiring connections and secure
speaker to bracket.
Speaker Adaptor Bracket
Tools Required
142 SAH6
Phillips
Screwdriver
Screwdriver
Parts
Supplied:
4
(2) Brackets
(6) # 8 Phillips
Screws
Screws
Revision 02/05/14
*142SAH6*
Drill &
1/8” Bit
1/8” Bit
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call
received. Thoroughly check packing materials. If an item
is missing, please call
Crutchfield at 1-888-955-6000.
4
Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
CAUTION:
!
It will be necessary to acquire screws to mount the
speaker to the adaptor bracket if speakers are not
supplied with screws.
speaker to the adaptor bracket if speakers are not
supplied with screws.
IMPORTANT
!