Scosche SAT6 Speaker Mounting Brackets Owner's Manual

1. If mounting holes on the vehicle surface do not align with bracket, use the

adaptor bracket as a template to mark mounting holes. Before securing
speaker, place bracket on mounting surface with the single tab at the top.
Mark locations of mounting holes. Remove bracket and drill out holes with
a 1/8” bit.

2. Place

speed clips on mounting hole locations.

3. Secure adaptor bracket to surface with hardware supplied.

4. Feed speaker wires through slot in bracket and connect

wires to speaker. Secure speaker to bracket.

Note: Check for specific wiring instructions in the

Crutchfield MasterSheet for your particular vehicle.

Speaker Adaptor Bracket

142 SAT6

Parts

Supplied:

(2) Brackets

(6) Phillips
Screws

Revision 02/24/14

*142SAT6*

Secure bracket to vehicle using appropriate
mounting tabs and hardware supplied.

Slot

(6) Speed Clips

Mounting Tab

Speed Clips

Tools Required

Phillips
Screwdriver

Drill & 1/8” Bit

Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.

CAUTION:

IMPORTANT

Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call

Crutchfield at 1-888-955-6000.

It will be necessary to acquire screws to mount the
speaker to the adaptor bracket if speakers are not
supplied with screws.

IMPORTANT