Simple Control Simple Cable Blaster Owner's Manual
Copyright © 2015 by Roomie Remote, Inc.
1
Simple Cable - Blaster
Setup Guide
This document describes the Simple Cable - Blaster, which lets you control multiple devices.
The Simple Cable - Blaster is available for
The Simple Cable - Blaster is available for
H
ARDWARE
S
ETUP
The Simple Cable - Blaster has a 3.5mm connector on one end that can attach:
•
Directly to a Simple Blaster: In this configuration, no other cables can connect to the
Simple Blaster.
Simple Blaster.
•
To Port 3 of a Simple Cable - Triport Adapter: When connecting to a Simple Cable - Triport
Adapter, the Simple Cable - Blaster must be connected to Port 3. Ports 1 and 2 of a Simple
Cable - Triport Adapter are reserved for emitter cables.
Adapter, the Simple Cable - Blaster must be connected to Port 3. Ports 1 and 2 of a Simple
Cable - Triport Adapter are reserved for emitter cables.
On the other end, the Simple Cable - Blaster has one blaster, which lets you control multiple
devices. Place the blaster eye within ~25 feet and in line of sight of the infrared receiver of all
devices you want to control.
devices. Place the blaster eye within ~25 feet and in line of sight of the infrared receiver of all
devices you want to control.
S
OFTWARE
C
ONFIGURATION
To configure a Simple Cable - Blaster:
1. Open the Simple Control app, edit a room, and tap Add Device.
2. On the Add Device screen, tap Simple Blaster WiFi or Simple Blaster Ethernet.
3. On the Choose Port screen, tap the appropriate port:
1. Open the Simple Control app, edit a room, and tap Add Device.
2. On the Add Device screen, tap Simple Blaster WiFi or Simple Blaster Ethernet.
3. On the Choose Port screen, tap the appropriate port:
Ø
If the Simple Cable - Blaster is directly connected to a Simple Blaster, select IR Port 3.
Ø
If the Simple Cable - Blaster is connected to Port 3 on a Simple Cable - Triport Adapter,
select IR Port 3.
select IR Port 3.
4. Finish configuring the device.
5. Return to the Add Device screen and make any necessary changes, then tap Simple Blaster
5. Return to the Add Device screen and make any necessary changes, then tap Simple Blaster
Settings.