Simple Control Simple Cable Serial RS-232 Owner's Manual
Copyright © 2015 by Roomie Remote, Inc.
1
Simple Cable - Serial
Setup Guide
This document describes the Simple Cable - Serial, which provides serial (RS-232) connectivity to
one device.
one device.
.
H
ARDWARE
S
ETUP
The Simple Cable - Serial has a 3.5mm connector on one end that must attach directly to a
Simple Blaster. The Simple Cable - Serial cannot be used with a Simple Cable – Triport
Adapter.
The other end of the Simple Cable - Serial is a 9-pin, male, RS-232 connector that attaches to a
female RS-232 connector on the target serial device. Included with the Simple Cable - Serial is a
gender changer that allows it to connect to a male RS-232 connector.
Simple Blaster. The Simple Cable - Serial cannot be used with a Simple Cable – Triport
Adapter.
The other end of the Simple Cable - Serial is a 9-pin, male, RS-232 connector that attaches to a
female RS-232 connector on the target serial device. Included with the Simple Cable - Serial is a
gender changer that allows it to connect to a male RS-232 connector.
S
OFTWARE
C
ONFIGURATION
To configure a Simple Cable - Serial:
1. Open the Simple Control app, edit a room, and tap Add Device.
2. On the Add Device screen, tap Simple Blaster WiFi or Simple Blaster Ethernet.
3. On the Choose Port screen, tap Serial 1.
4. Finish configuring the device.
5. On the Add Device screen, tap Simple Blaster Settings.
1. Open the Simple Control app, edit a room, and tap Add Device.
2. On the Add Device screen, tap Simple Blaster WiFi or Simple Blaster Ethernet.
3. On the Choose Port screen, tap Serial 1.
4. Finish configuring the device.
5. On the Add Device screen, tap Simple Blaster Settings.