Pioneer AVIC-5201NEX Owner's Manual
31
Switching visibility
This function sets whether or not to make this product visible to
the other device.
The default setting is “On”.
1 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
2 Touch [Visibility] to switch “On” or “Off”.
Entering the PIN code for
Bluetooth wireless connection
Bluetooth wireless connection
To connect your Bluetooth device to this product, you need to
enter a PIN code.
The default PIN code is “0000”.
1 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
2 Touch [PIN Code Input].
3 Touch [0] to [9] to input the pin code (up to 8
3 Touch [0] to [9] to input the pin code (up to 8
digits).
4 Touch
.
Displaying the device
information
information
1 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
2 Touch [Device Information].
The device name and address of the Bluetooth device on this
product are displayed.
Clearing the Bluetooth memory
CAUTION
Never turn this product off while the Bluetooth memory is
being cleared.
being cleared.
1 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
2 Touch [Bluetooth Memory Clear].
3 Touch [Clear].
4 Touch [OK].
3 Touch [Clear].
4 Touch [OK].
Updating Bluetooth software
This function is used to update this product with the latest
Bluetooth software. For details on Bluetooth software and updat-
ing, refer to our website.
p
p
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p
The source is turned off and the Bluetooth connection is
disconnected before the process starts.
p
You need to store the version update file to the USB storage
device in advance.
CAUTION
Never turn this product off and never disconnect the phone
while the software is being updated.
while the software is being updated.
1 Connect the USB storage device stored the ver-
sion update file to this product.
Refer to Plugging and unplugging a USB storage device on
page 5
2 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
3 Touch [BT Software Update].
4 Touch [Start].
4 Touch [Start].
Follow the on-screen instructions to finish updating the
Bluetooth software.
Displaying the Bluetooth soft-
ware version
ware version
If this product fails to operate properly, you may need to consult
your dealer for repair.
In such cases, perform the following procedure to check the
software version on this product.
1 Display the “Bluetooth” screen.
Refer to Displaying the “Bluetooth” screen on page 30
2 Touch [Bluetooth Version Information].
The version of this product’s Bluetooth module appears.
*2
*3
*1
*4
*5
*6
*1
Switches to the preset dial screen.
Refer to Using the preset dial lists on page 32
*2
Switches to the phone book list.
Refer to Calling a number in the phone book on
page 32
*3
Switches to the missed, received and dialed call lists.
Refer to Dialing from the history on page 32
*4
Switches the mode to enter the phone number
directly.
Refer to Direct dialing on page 32
*5
Switches to the voice recognition function.
Refer to Using the voice recognition function on
page 33
*6
The following items are displayed.
Name of the current cellular phone
List number of the current cellular phone
Indicates that a Bluetooth telephone is
connected.
Reception status of the current cellular phone
Battery status of the current cellular phone
To use this function you need to connect your cellular phone to
this product via Bluetooth in advance.
Refer to Bluetooth
®
connection on page 30
CAUTION
For your safety, avoid talking on the phone as much as
possible while driving.
possible while driving.
Hands-free phoning
< CRB5005-A >
Bluetooth
®
connection
Hands-free
phoning