Alpine INE-W957HD Owner's Manual

Page of 237
37
-EN
Display example for DVD Video main screen
Display example for DivX
®
 main screen
Information display-1
DVD-Video:
Title name/Chapter No.
DivX
®
:
File name/File No./Current File No./Total File No. in Current 
Folder
Information display-2
DVD-Video:
Audio signal output/Subtitle/Angle
DivX
®
:
Audio signal output/Subtitle
Total time for playing
Elapsed time
Disc types that can be used for each heading are 
represented by the following marks.
The DVD operation screen display
Touch the screen while the DVD playback screen is 
displayed.
The DVD operation screen is displayed.
• The operation screen changes to the visual screen in the DVD mode 
for 5 seconds after an operation has been performed.
• If you try to activate the DVD while driving, the display will show the 
warning-Picture off for your safety.
• Some operations cannot be carried out depending on the disc or 
playback screen.
Playing a Disc 
DVD
Touch [<<], [>>]
Touch [<<], [>>]
DVD Commercial Video discs (used for the 
distribution of movies, etc.) or a DVD-R/DVD-
RW, DVD+R/DVD+RW recorded in a video 
mode can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the 
DivX
®
 mode can be used.
WARNING
It is dangerous for the driver to watch the DVD/TV/
Video while driving the vehicle. The driver may be 
distracted from looking ahead and an accident could 
occur.
Install the X008U/INE-W957HD correctly so that the 
driver cannot watch DVD/TV/Video unless the vehicle 
is stopped and the emergency brake is applied.
If the X008U/INE-W957HD is not installed correctly, 
the driver will be able to watch the DVD/TV/Video 
while driving the vehicle and may be distracted from 
looking ahead causing an accident. The driver or 
other people could be severely injured.
Caution
• Not all functions will operate for every DVD. See the 
individual DVD’s instructions for details on the 
features supported.
• Fingerprints on a disc may adversely affect 
playback. If a problem occurs, remove the disc and 
check for fingerprints on the playback side. Clean 
the disc if necessary.
• If you switch the power or Ignition key OFF or 
change sources during playback, playback will 
continue where you left off when you resume 
playback. 
• If you try to perform an invalid operation (based on 
the type of disc being played), the following mark is 
displayed on the monitor screen: