Alpine INE-W977HD Owner's Manual

Page of 252
76
-EN
Info mode
Current track no.
Playback control (PBC)/Current audio status
Elapsed time
Disc types that can be used for each heading are represented 
by the following marks.
The DVD operation screen display
Touch the screen while the DVD playback screen is displayed.
To display the operation screen, touch [Control].
• The operation screen changes to the visual screen in the DVD mode for 
5 seconds after an operation has been performed.
• If you try to activate the DVD while driving, the display will show the 
warning-Picture off for your safety.
• Some operations cannot be carried out depending on the disc or 
playback screen.
Playing a Disc 
 
1
Press the 
 (AUDIO) button to select DVD (CD) mode.
The display shows the DVD (CD) mode screen.
When a disc is inserted into the disc slot of the DVD Player, with 
the label side facing up, the unit starts playback of the disc.
• The reverse side of a double-sided DVD will not be played 
automatically. 
Remove the disc, turn it over, and reinsert it.
• DO NOT insert discs containing maps for the navigation system. Doing 
so could result in damage.
• For your safety, video is not displayed and only audio can be heard 
while driving.
DVD Commercial Video discs (used for the 
distribution of movies, etc.) or a DVD-R/DVD-
RW, DVD+R/DVD+RW recorded in a video mode 
can be used.
Video-CD discs can be used.
WARNING
It is dangerous for the driver to watch the DVD while 
driving the vehicle. The driver may be distracted from 
looking ahead and an accident could occur.
Install the unit correctly so that the driver cannot watch 
DVD unless the vehicle is stopped and the emergency 
brake is applied.
If the unit is not installed correctly, the driver will be able 
to watch DVDs while driving the vehicle and may be 
distracted and could cause an accident. The driver or 
other people could be severely injured.
CAUTION
• Not all functions will operate for every DVD. See the 
individual DVD’s instructions for details on the features 
supported.
• Fingerprints on a disc may adversely affect playback. If 
a problem occurs, remove the disc and check for 
fingerprints on the playback side. Clean the disc if 
necessary.
• If you switch the power or Ignition key OFF or change 
sources during playback, playback will continue where 
you left off when you resume playback. 
• If you try to perform an invalid operation (based on the 
type of disc being played), the following mark is 
displayed on the monitor screen:
• Play Position Memory Function 
Even if you turn power off or switch the Ignition key to 
OFF during playback or change the source, playback 
will continue from the point where playback stopped 
when the power is turned ON again.