Alpine INE-W977HD Owner's Manual

-EN

Adjusting Bass Level/Treble Level

Bass Level and Treble Level can be set independently set for Front and
Rear speakers by touching [Front] or [Rear].

Setting item:

Bass / Treble

Setting contents:

-14 to +14 (Initial setting: 0)

• When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting

is disabled.

• Adjustment cannot be performed when Defeat is set to “On.”
• The Bass adjusted setting value is interlinked with Band2 of Dual HD

EQ, and the Treble adjusted setting value is interlinked with Band8.

Setting the BASS ENGINE SQ

Setting the BASS ENGINE Type

Creating the ideal Bass impact for your musical taste using BASS
ENGINE SQ.

Setting contents:

Standard (Initial setting) / Punch / Rich / Mid Bass / Low Bass

Adjusting the BASS ENGINE Level

You can adjust the BASS ENGINE Level.

Setting item:

BASS ENGINE Level

Setting contents:

0 to 6 (Initial setting: 3)

• The BASS ENGINE Level 0 of the BASS ENGINE SQ is common to all

the types.

About setup when the external power amplifier is
connected

In order to optimize the BASS ENGINE SQ mode, we recommend the
following procedure to set up the power amplifier.
Use your favorite music to make the following amplifier adjustment.

Set GAIN of the power amplifier to “MIN.”

Set the Crossover Mode Selector switch to “OFF.”

• If the switch has no “OFF” position, set as near as possible to full

range.

Set the BASS ENGINE Level to “03.”

Play a song of the genre you frequently listen to, and adjust
GAIN of the power amplifier.

The Rear Seat Entertainment function independently routes different
sources to the front and the rear side of the car. For example, while
listening to the radio or other audio sources in the front, HDMI can be
enjoyed at the rear with optional rear monitors and headphones.

Rear Seat Entertainment System Setup screen

Button for changing to the Sound Setup screen.
Visual source selection area that is displayed on the Rear
monitor.*

Touch the source icon displayed on the Rear monitor.
Front: The image and sound of the same visual source as the unit
are output.
Off: Stops output to the Rear monitor.

Illumination Color button

The color coordination select button of the Rear monitor:
White/Blue/Green/Amber/Red/Purple/Skyblue/Off
(This function is depended on Over Head Monitor)

Plasmacluster air volume adjustment button*

Whenever you touch the button, you can change the air volume.
Off

Low

Mid

High

Off

• While the plasmacluster is operating, the indicator is displayed on

the Audio source screen.

Remote Sensor

You can set whether the sensor on Rear monitor receives remote
control operation, or the unit receives it.

The visual source that can be output to the Rear monitor is “HDMI/
DVD,” and “AUX.” When the unit plays back the visual source, you can
only select the same visual source as the unit.

When the Plasmacluster in “Setting the Rear Seat Entertainment
System” (page 50) is set to “Off,” the Plasmacluster air volume
adjustment button is not displayed.

• If the same visual source is being output to both the unit and the Rear

monitor when an incoming/outgoing call is made, the visual/audio
output to the Rear monitor is interrupted temporarily depending on the
source.
If different visual sources are being output to the unit and the Rear
monitor, visual/audio output to the Rear monitor continues without
interrupting playback.

Standard:

Mild low-end boost with mid-range focus for front-
center staging.

Punch:

Mid-bass punched up with mid-range impact.

Rich:

Accented highs and mid-bass giving outstanding
balance for all types of music.

Mid Bass:

Strong high frequency emphasis with mid-bass boost
for more low-end attack.

Low Bass:

Strong, low-bass boost with extended highs for a very
dynamic sound.

Rear Seat Entertainment Function