Alpine X108U Owner's Manual
29
-EN
Setup Operation
1
Press the MENU button.
The Menu screen is displayed.
• You can also display the menu screen, by touching [
• You can also display the menu screen, by touching [
]
on the lower part of the Audio source screen or by swiping upward.
2
Touch [Setup].
The Setup main screen is displayed.
3
Touch the required setting icon on the upper part of the
Setup main screen or swipe the list area vertically, then
touch the setting item.
Setup main screen or swipe the list area vertically, then
touch the setting item.
Setting items:
Wireless: See “Wireless (Bluetooth) Setup” (page 30).
General: See “General Setup” (page 32).
Source: See “Source Setup” (page 42).
System: See “System Setup” (page 45).
General: See “General Setup” (page 32).
Source: See “Source Setup” (page 42).
System: See “System Setup” (page 45).
Setup
As the X110 is for specialized vehicles, its initial settings
differ from the values shown in this manual.
differ from the values shown in this manual.
To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car’s ignition has not been turned off. It is not necessary to repeat
the above procedure
(1 through 3) of “To display the Setup Menu screen.”
Engaging the parking brake can reactivate the Setup Menu, as long as
the car’s ignition has not been turned off. It is not necessary to repeat
the above procedure
(1 through 3) of “To display the Setup Menu screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Setup Menu screen.”
display the Setup Menu screen.”
[Setup] button