Alpine X108U Owner's Manual
41
-EN
General Setup
[General]
is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 32).
You can set up items related to the language, etc.
You can set up items related to the language, etc.
The Setup menu, feedback information, etc. for this unit can be changed
to appear in the selected language.
to appear in the selected language.
Setting item:
Language
Setting contents:
The character code to be used for tag text information displayed on the
screen can be selected from 7 character codes.
screen can be selected from 7 character codes.
Setting item:
Format
Setting contents:
Latin-1 / Latin-9 (Initial setting) / Russian / Chinese / Thai / Arabic / Hebrew
[About]
enables you to check the Serial No., Firmware Version, Model
Name, and to initialize various settings.
Displaying the Product Information
You can view the version information of this product. Make note of this
information and refer to it whenever you contact Alpine Tech Support
or an Alpine-authorized dealer.
information and refer to it whenever you contact Alpine Tech Support
or an Alpine-authorized dealer.
Setting contents:
Serial No. / Firmware Version / Model Name
Initializing the System
You can initialize all data, to restore the factory settings. Remove the
USB flash drive, etc. from the system before operation
USB flash drive, etc. from the system before operation
Setting item:
Clear All Settings
1
Touch [Reset] of “Clear All Settings.”
2
After the confirmation message appears, touch [OK].
The confirmation screen appears again.
3
Touch [OK].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, set Demo mode to Off.
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, set Demo mode to Off.
Setting item:
Demo mode
Setting contents:
Off (Initial setting) / On
• If you perform an operation during the Demo mode, the demonstration
is temporarily stopped.
Vehicle Setup
[Vehicle]
is selected on the General Setup Menu screen in step 1. See
Vehicle Setup enables you to check the connection status of Reverse
Lead/Parking Brake Lead.
Lead/Parking Brake Lead.
Setting item:
Installation Status
The Installation check screen is displayed.
Setting the Menu Language
Format settings
Latin-1:
ISO 8859-1
Latin-9:
ISO 8859-15
Russian:
ISO 8859-5
Chinese:
GB18030-2005
Thai: CP874
Arabic:
CP1256
Hebrew:
CP1255
About X110/X108U/INE-W967HD
Setting Demo mode to Off/On
Installation Setup