Alpine X009-FD1 In-Dash Restyle System Owner's Manual
82
-EN
Checking the SiriusXM Radio ID Number
To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:
1
While receiving SiriusXM Radio, touch [ < ] or [ > ]
to select channel “0”.
to select channel “0”.
The unit displays the ID number.
2
To cancel the ID number display, change the channel
other than “0”.
other than “0”.
• The SiriusXM Radio ID does not contain the letters I, O, S, or F.
Storing Channel Presets
You can store 18 of your favorite SiriusXM channels for easy recall
with Preset buttons.
with Preset buttons.
1
Touch [Band] to select the desired band you want to
store the preset in.
store the preset in.
There are 3 Satellite Radio Preset bands. Each touch of
[Band] changes the band:
SiriusXM-1
[Band] changes the band:
SiriusXM-1
SiriusXM-2
SiriusXM-3
SiriusXM-1
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; SiriusXM-1, SiriusXM-2 and
SiriusXM-3.)
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; SiriusXM-1, SiriusXM-2 and
SiriusXM-3.)
• If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the
new one.
new one.
Tuning Channels using Presets
1
Touch [Band] of Bottom banner repeatedly until the
desired band is displayed.
desired band is displayed.
2
Touch any one of the preset buttons that has a
station stored to it.
station stored to it.
The preset station is received.
Tune Start Function
Use Tune Start to play music content from its beginning on programmed
preset stations. The user can, therefore, enjoy the full track (i.e. song)
rather than hearing what’s left from its current live playback position.
preset stations. The user can, therefore, enjoy the full track (i.e. song)
rather than hearing what’s left from its current live playback position.
Touch and hold [Tune Start] for at least 2 seconds to
activate or deactivate the Tune Start function.
activate or deactivate the Tune Start function.
• During Tune Start play mode, touching [Tune Start] will return to
live satellite radio.
• This function is available only when SiriusXM Tuner-SXV200 is
connected.
• Preset stations that play other than music-type content will start
playing the channel from the current live play point when selected.
Tune Scan Function
While listening to SiriusXM Satellite Radio, you can scan through all
the songs you missed from your current band of preset channels.
the songs you missed from your current band of preset channels.
Touch [Tune Scan].
The [Tune Scan] highlighted during TUNE SCAN mode.
Touch [Tune Scan] during scan playback, tune scan mode
will be canceled and the selected track will be played back
normally.
Touch and hold [Tune Scan] for at least 2 seconds during
scan playback to cancel Tune Scan mode. The tuner returns
to the channel before Tune Scan was initiated.
Touch [Tune Scan] during scan playback, tune scan mode
will be canceled and the selected track will be played back
normally.
Touch and hold [Tune Scan] for at least 2 seconds during
scan playback to cancel Tune Scan mode. The tuner returns
to the channel before Tune Scan was initiated.
Notes
• This function is available when SiriusXM Tuner-SXV200 is
connected.
• If no operation is performed during the scanning process, when
scanning finishes, the next mode depends on the SiriusXM Tuner.
• During Tune Scan mode, the artist and song name will be displayed.
• The SiriusXM Tune scans through the songs from the preset music
• The SiriusXM Tune scans through the songs from the preset music
channels on the current band only, scanning from oldest to newest.
Channel No.
Channel Name
Artist Name
Song Title
Channel Name
Artist Name
Song Title
Content Info
Category Name
Category Name