Manualsbrain.com
  1. Manuals
  2. Brands
  3. Alpine
  4. X009-FD1 In-Dash Restyle System
  5. Owner's Manual

Alpine X009-FD1 In-Dash Restyle System Owner's Manual

Download
Page of 251
70
-EN
You can make a telephone call by using voice operation.
• Connect your smartphone to the unit via Bluetooth, then set to 
“Hands-free” or “Both”. (Page 62)
1
Press and hold the 
 (PHONE) button for at least 
3 seconds.
The Voice Dial mode screen is activated.
2
Say the telephone number* or name* you want to 
call, into the microphone.
* The number and name depend on the voice dial information stored in 
the smartphone.
3
To finish the Voice Dial mode, touch [
] or press 
and hold the 
 (PHONE) button for at least 3 
seconds.
• You can perform this operation only when a voice dial compatible 
smartphone is connected.
• The Voice Dial function performance depends on the recognition 
range of the smartphone.
• Voice dial operation depends on the function being available on the 
smartphone. For details, refer to the owner’s manual of the 
smartphone.
• Depending on the smartphone, the Voice Dial operation may finish 
automatically.
Adjusting the volume
Adjust the speaker/microphone volume in Voice Dial mode. Perform the 
same procedure to adjust the speaker/microphone volume of Hands-
Free Phone.
Touch [
] or [
] of 
.
Adjust the speaker volume.
Touch [
] or [
] of 
.
Adjust the microphone volume.
Stopping input to the microphone
If the surrounding sound (road noise, etc.) is loud, you may wish to cut 
input to the microphone for 3 seconds.
Touch [
].
Operations During a Conversation
Display example
Name and phone number
Conversation time
You can adjust the transmit volume and receive volume respectively.
Touch [
] or [
] for “Vol.”.
You can adjust the volume in 11 levels.
Touch [
] to turn down the volume. Touch [
] to turn up the 
volume. 
The voice output for calls is switchable between car speakers and the 
mobile phone speaker.
Touch [
].
• Depending on the mobile phone, this operation may not be possible.
Transmits a DTMF (Touch-Tone) during a call.
1
Touch [TONE].
The number input screen appears.
2
Input number.
• You can transmit a Touch-Tone signal during a call.
• Touching and holding “0” initiates “+” tone transmission.
Voice Dial Function
Adjusting the Speech Volume
 
: Outgoing volume
 
: Incoming volume
Changing the Voice Output
DTMF (Touch-Tone) Function