JVC KW-M730BT Owner's Manual

6

 or 7

6

 or 7

Car Bracket

•  Make sure that the unit is installed securely in 

place. If the unit is unstable, it may malfunction 
(eg, the sound may skip).

 

Ñ

GPS antenna is installed inside of the car. It 

should be installed as horizontally as possible 

to allow easy reception of the GPS satellite 

signals.
To mount the GPS antenna inside your vehicle:
1) Clean your dashboard or other surface.
2) Remove the separator of the metal plate 

(accessory 9).

3) Press the metal plate (accessory 9) down 

firmly on your dashboard or other mounting 
surface. You can bend the metal plate 
(accessory 9) to conform to a curved surface, 
if necessary.

4) Remove the separator of the GPS antenna 

(accessory 8), and stick the antenna to the 
metal plate (accessory 9).

9

8

•  Depending on the type of car, reception of the 

GPS satellite signals might not be possible with 
an inside installation.

•  Please install this GPS antenna in an area away 

from any antennas that are used with CB radios or 
satellite televisions.

•  The GPS antenna should be installed at a position 

that is spaced at least 12 inch (30 cm) from 
cellular phone or other transmitting antennas. 
Signals from the GPS satellite may be interfered 
with by these types of communication.

•  Painting the GPS antenna with (metallic) paint 

may cause a drop in performance.

 

Ñ

1) Check the installation position of the 

microphone (accessory 4).

2) Clean the installation surface.
3) Remove the separator of the microphone 

(accessory 4), and stick the microphone to 
the place shown below.

4) Wire the microphone cable up to the unit 

with it secured at several positions using tape 
or other desired method.

5) Adjust the direction of the microphone 

(accessory 4) to the driver.

4

Fix a cable with a commercial item of tape.

!B5A-1733-00b_17KWV-K_En.indb   81

2017/02/01   11:13