Sony XAV-602BT Owner's Manual

Page of 57
42
GB
RDS (XAV-602BT only)
PTY displays [PTY not found.].
 The current station is not an RDS station.
 RDS data has not been received.
 The station does not specify the program type.
Picture
There is no picture/picture noise occurs.
 A connection has not been made correctly.
 Check the connection between this unit and 
other equipment, and set the input selector of 
the equipment to the source corresponding to 
this unit.
 The disc is defective or dirty.
 Installation is not correct.
 Install the unit at an angle of less than 45° in a 
sturdy part of the car.
 The parking cord (light green) is not connected to 
the parking brake switch cord, or the parking 
brake is not applied.
 Activate the video output of the iPod.
The picture does not fit in the screen.
 The aspect ratio is fixed on the  DVD.
There is no picture/picture noise occurs in the 
rear monitor.
 A source/mode which is not connected is 
selected. If there is no input, no picture appears 
in the rear monitor.
 The color system setting is incorrect.
 Set the color system to [PAL] or [NTSC] 
according to the connected monitor (page 26).
 The picture of the rear view camera is displayed 
on this unit.
 No picture appears in the rear monitor if the 
picture of the rear view camera is displayed on 
this unit.
Sound
There is no sound/sound skips/sound cracks.
 A connection has not been made correctly.
 Check the connection between this unit and the 
connected equipment, and set the input selector 
of the equipment to the source corresponding to 
this unit.
 The disc is defective or dirty.
 Installation is not correct.
 Install the unit at an angle of less than 45° in a 
sturdy part of the car.
 The MP3 file sampling rate is not 32, 44.1, or 48 
kHz.
 The WMA file sampling rate is not 32, 44.1, or 48 
kHz.
 The AAC file sampling rate is not 44.1 or 48 kHz.
 The MP3 file bit rate is not 48 to 192 kbps.
 The WMA file bit rate is not 64 to 192 kbps.
 The AAC file bit rate is not 40 to 320 kbps.
 The unit is in pause/reverse/fast-forward mode.
 The settings for the outputs are not made 
correctly.
 The DVD output level is too low (page 18).
 The volume is too low.
 The ATT function is activated.
 The format is not supported (such as DTS).
 Check if the format is supported by this unit 
(page 33).
Sound is noisy.
 Keep cords and cables away from each other.
Disc operation
The disc does not play.
 The disc is defective or dirty.
 The disc is not playable.
 The DVD is not playable due to the region code.
 The disc is not finalized (page 33).
 The disc format and file version are incompatible 
with this unit (page 33).
 Press  to remove the disc.
MP3/WMA/AAC/Xvid/MPEG-4 files do not play.
 Recording was not performed according to the 
ISO 9660 level 1 or level 2 format or the Joliet or 
Romeo expansion format (DATA CD), or the UDF 
Bridge format (DATA DVD) (page 33).
 The file extension is incorrect (page 34).
 Files are not stored in MP3/WMA/AAC/Xvid/
MPEG-4 format.
 If the disc contains multiple file types, only the 
selected file type (audio/video) can be played.
 Select the appropriate file type using the list 
(page 16).
MP3/WMA/AAC/Xvid/MPEG-4 files take longer 
to play than others.
 The following discs take a longer time to start 
playback.
 a disc recorded with a complicated tree 
structure.
 a disc recorded in Multi Session/Multi Border.
 a disc to which data can be added.
The disc does not start playing from the 
beginning.
 Resume playback or multi-disc resume playback 
(page 30) has taken effect.
Certain functions cannot be performed.
 Depending on the disc, you may not be able to 
perform operations such as stop, search, or 
repeat/shuffle play. For details, refer to the 
manual supplied with the disc.
The soundtrack/subtitle language or angle 
cannot be changed.
 Use the DVD menu instead of the direct selection 
button on the remote commander (page 14).