JVC KW-V230BT Owner's Manual

ENGLISH

61

R Supplied accessories for installation

1  Wiring harness x 1

2  Extension wire (2 m) x 1

3  Flat head screws (M5 x 8 mm) x 6

4  Round head screws (M5 x 8 mm) x 6

5  Microphone (3 m) x 1

R Installation procedure

  To prevent a short circuit, remove the key 

from the ignition and disconnect the 

·

 

battery.

  Make the proper input and output wire 

connections for each unit.

  Connect the speaker wires of the wiring 

harness.

  Connect the wiring harness wires in the 

following order: ground, battery, ignition.

  Connect the wiring harness connector to 

the unit.

  Install the unit in your car.

•  Make sure that the unit is installed securely 

in place. If the unit is unstable, it may 
malfunction (eg, the sound may skip).

 Reconnect 

the 

·

 battery.

  Press the reset button. (Page 3)

 Configure 

<Initial Settings>. (Page 4)

R  Installing the unit using the mounting 

Car Bracket

3 or 4

3 or 4

•  Select the appropriate type of screw for the 

mounting bracket: flat head (

3) or round head 

(

4).

2017_KW-V_Entry_K.indb   61

2016/06/02   21:22