JVC KW-V230BT Owner's Manual

Page of 78
64
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
 
 Connecting external components
1 iPod/AV-IN input
•  Connect the following type of 4-pole mini 
plug:
1
24
3
1 Left audio
2 Right audio
3 Ground
4 Composite video
2  Video output (Yellow)
3 Rear preout*
•  Audio left output (White)
•  Audio right output (Red)
4 Front preout*
•  Audio left output (White)
•  Audio right output (Red)
5 Subwoofer preout*
•  Subwoofer left output (White)
•  Subwoofer right output (Red)
6  Expansion port for connecting SiriusXM Connect 
Vehicle Tuner (commercially available)
7  Rear view camera input (Yellow)
*  When connecting an external amplifier, connect its ground wire to 
the chassis of the car; otherwise the unit may be damaged.
 
Connecting external amplifiers for 3 way 
speakers system
Tweeter preout
Mid range preout
Woofer preout
RCA cable (not supplied)
Speaker
*
 
*  When connecting to an external amplifier, connect its ground wire 
to the car’s chassis.
 
 Connecting microphone for Bluetooth
Connect the microphone (
5) to the MIC terminal.
•  To install the microphone, peel off the adhesive 
tape, fix on the installation position, then adjust 
the direction of the microphone to face the driver. 
After installing, fix the microphone cable to the car 
with clamps (commercially available).
5
2017_KW-V_Entry_K.indb   64
2016/06/02   21:22