Kenwood DDX374BT Owner's Manual

Page of 81
66
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
 
 Connecting external components
1  Expansion port for connecting SiriusXM Connect 
Vehicle Tuner (commercially available)*
1
2  iDatalink input for connecting ADS adapter 
(commercially available)*
2
3  iPod/Audio Video input (iPod/AV-IN)*
3
4  Video output (Yellow)
5 Rear preout*
4
•  Audio left output (White)
•  Audio right output (Red)
6 Front preout*
4
•  Audio left output (White)
•  Audio right output (Red)
7 Subwoofer preout*
4
 
• Subwoofer left output (White)
 
• Subwoofer right output (Red)
8  Rear view camera input (Yellow)
*
1
  Only for DDX374BT/DDX24BT.
*
2
  Only for DDX374BT.
*
3
  When connecting the component to play on “AV-IN”, use the 
Audio and Video cable CA-C3AV (optional accessory).
*
4
  When connecting an external amplifier, connect its ground wire to 
the chassis of the car; otherwise the unit may be damaged.
 
 Connecting microphone for Bluetooth
Connect the microphone (
7) to the MIC terminal.
•  To install the microphone, peel off the adhesive 
tape, fix on the installation position, then adjust 
the direction of the microphone to face the driver. 
After installing, fix the microphone cable to the car 
with clamps (commercially available).
7
2017DDX-Entry_K.indb   66
2016/06/03   10:07