Sony XAV-V631BT Owner's Manual
28
GB
Echo or noise occurs during call conversations.
Reduce the volume.
Reduce the volume.
If ambient noise other than the phone call sound
is loud, try reducing this noise.
– Shut the window if road noise is loud.
– Lower the air conditioner if the air conditioner is
– Shut the window if road noise is loud.
– Lower the air conditioner if the air conditioner is
loud.
The phone sound quality is poor.
Phone sound quality depends on reception
Phone sound quality depends on reception
conditions of the cellular phone.
– Move your car to a place where you can
– Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
reception is poor.
The volume of the connected BLUETOOTH device
is low or high.
Volume level will differ depending on the
is low or high.
Volume level will differ depending on the
BLUETOOTH device.
– Reduce the volume level differences between
– Reduce the volume level differences between
this unit and the BLUETOOTH device (page 13).
The sound skips during audio streaming or the
BLUETOOTH connection fails.
Reduce the distance between the unit and the
BLUETOOTH connection fails.
Reduce the distance between the unit and the
BLUETOOTH device.
If the BLUETOOTH device is stored in a case which
interrupts the signal, remove the case while
using the device.
using the device.
Several BLUETOOTH devices or other devices (e.g.
ham radio devices) which emit radio waves are
used nearby.
– Turn off the other devices.
– Increase the distance between the unit and
used nearby.
– Turn off the other devices.
– Increase the distance between the unit and
other devices.
Playback sound stops momentarily when this
unit is connecting to a cellular phone. This is not
a malfunction.
a malfunction.
You cannot control the connected BLUETOOTH
device during audio streaming.
Check that the connected BLUETOOTH device
device during audio streaming.
Check that the connected BLUETOOTH device
supports AVRCP.
Some functions do not work.
Check that the connecting device supports the
Check that the connecting device supports the
functions in question.
A call is answered unintentionally.
The connecting phone is set to start a call
The connecting phone is set to start a call
automatically.
[Auto Answer] of this unit is set to [ON] (page 16).
Pairing failed due to time out.
Depending on the connecting device, the time
Depending on the connecting device, the time
limit for pairing may be short. Try completing the
pairing within the time.
pairing within the time.
The BLUETOOTH function cannot be operated.
Turn the ignition off. Wait for a while, then turn
Turn the ignition off. Wait for a while, then turn
the ignition to the ACC position.
No sound is output from the car speakers during
a handsfree call.
If the sound is output from the cellular phone, set
a handsfree call.
If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
car speakers.
Siri Eyes Free is not activated.
Perform the handsfree registration for an iPhone
Perform the handsfree registration for an iPhone
that supports Siri Eyes Free.
Set the Siri function on the iPhone to on.
Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
SongPal operation
Application name is mismatched with the actual
application in “SongPal.”
Launch the application again from the “SongPal”
application in “SongPal.”
Launch the application again from the “SongPal”
application.
Pandora® operation
Pandora® connection is not possible.
Shut down the Pandora® application on the
Shut down the Pandora® application on the
mobile device, then launch it again.
Error displays/messages
USB hub not supported
USB hubs are not supported on this unit.
USB hubs are not supported on this unit.
No Playable Data
The disc does not contain playable data (XAV-
The disc does not contain playable data (XAV-
W651BT).
The iPod has no playable data.
– Load music data/files into the iPod.
The USB device has no playable data.
– Load music data/files into the USB device.
Cannot play this content.
The currently selected content cannot be played
The currently selected content cannot be played
back.
– Playback content will be skipped to the next
– Playback content will be skipped to the next
one.
Overcurrent Caution on USB
The USB device is overloaded.
The USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing the SOURCE button.
– Indicates that the USB device is out of order, or
an unsupported device is connected.
USB device not supported
For details on the compatibility of your USB
For details on the compatibility of your USB
device, visit the support site on the back cover.