Sony XAV-W651BT Owner's Manual
9
GB
Note
While connecting to a BLUETOOTH device, this unit cannot
be detected by another device. To enable detection, enter
the pairing mode and search for this unit from another
device.
be detected by another device. To enable detection, enter
the pairing mode and search for this unit from another
device.
To start playback
For details, see “Playing a BLUETOOTH Device”
(page 13).
(page 13).
To cancel pairing
Perform step 5 to cancel the pairing mode after this
unit and the BLUETOOTH devices are paired.
unit and the BLUETOOTH devices are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
required. Some paired devices will connect
automatically.
1
Press HOME, then touch [Settings].
2
Touch [Bluetooth Connection], then touch
[ON].
[ON].
Make sure that
lights up on the status bar of
the unit.
3
Activate the BLUETOOTH function on the
BLUETOOTH device.
BLUETOOTH device.
4
Operate the BLUETOOTH device to connect
to this unit.
to this unit.
or
lights up on the status bar.
To connect the last-connected device from
this unit
this unit
When the ignition is turned to on with the
BLUETOOTH signal activated, this unit searches for
the last-connected BLUETOOTH device, and
connection is made automatically.
If it does not work, touch [Reconnect] to search for
the last-paired device again. If the problem is not
solved, follow the pairing procedure.
BLUETOOTH signal activated, this unit searches for
the last-connected BLUETOOTH device, and
connection is made automatically.
If it does not work, touch [Reconnect] to search for
the last-paired device again. If the problem is not
solved, follow the pairing procedure.
Note
While streaming BLUETOOTH audio, you cannot connect
from this unit to the cellular phone. Connect from the
cellular phone to this unit instead.
from this unit to the cellular phone. Connect from the
cellular phone to this unit instead.
To install the microphone
For details, see “Installing the microphone”
(page 34).
(page 34).
Connecting a USB Device
1
Turn down the volume on the unit.
2
Connect the USB device to the unit.
To connect an iPod/iPhone, use the USB
connection cable for iPod (not supplied).
connection cable for iPod (not supplied).
Connecting Other Portable
Audio/Video Devices
Audio/Video Devices
1
Turn off the portable audio/video device.
2
Turn down the volume on the unit.
3
Connect the portable audio/video device to
the AUX input jack on the unit with a
connecting cord (not supplied).
the AUX input jack on the unit with a
connecting cord (not supplied).
4
Press HOME, then touch [AUX].
To match the volume level of the connected
device to other sources
device to other sources
Start playback of the portable audio/video device
at a moderate volume and set your usual listening
volume on the unit:
Touch
at a moderate volume and set your usual listening
volume on the unit:
Touch
, then set [Input Level] between –10 and
+15.
To set to the device type manually
Touch
, then set [AUX Input] to [Audio], [Video],
or [Auto].
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
“Connection/Installation” (page 31).
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
“Connection/Installation” (page 31).
Connecting with a paired BLUETOOTH
device
device