Clarion VX405 Owner's Manual

54

VX405

English

Owner’

s Manual

Power does not turn on. (No 
sound is produced.)

Fuse is blown.

Replace with a fuse of the 
same amperage. If the fuse 
blows again, consult your store 
of purchase.

Incorrect wiring.

Consult your installation center.

Nothing happens when buttons 
are pressed. 

Display is not accurate.

The microprocessor has 
malfunctioned due to noise, 
etc.

Press the reset button with a 
thin rod.
Note:

* When the Reset button is 
pressed, frequencies of radio 
stations, titles, etc. stored in 
memory are cleared.

The remote control unit does 
not work.

Direct rays of the sun fall on 
the light-receptive part of the 
remote control unit.

When direct rays of the sun fall 
on the light-receptive part of 
the remote control unit, it may 
not work.

The battery of the remote 
control unit is dead or there is 
no battery in the remote control 
unit.

Check the battery of the remote 
control unit.

Disc cannot be loaded.

A disc is already loaded.

Eject the disc before loading 
the new one.

There is foreign matter already 
in the disc slot.

Remove the foreign matter, or 
consult a service station.

Sound skips or is noisy.

Disc is dirty.

Clean the disc with a soft cloth.

Disc is heavily scratched or 
warped.

Replace with a disc in good 
condition.

Sound is bad directly after 
power is turned on.

Condensation may form on the 
internal lens when the car is 
parked in a humid place.

Let dry for about 1 hour with the 
power on.

Video images are not 
displayed.

The parking brake is not 
engaged.

Check that the parking brake is 
engaged.

Disc cannot play with 
the display “PARENTAL 
VIOLATION” shown.

Feature exceeds set parental 
level.

Release the view limitation or 
change the parental level. 
See the subsection “Setting up 
the parental level”