Kenwood KMM-BT322U Owner's Manual
36
Do the required wiring.
( 37)
( 37)
Dashboard of
your car
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Remove the trim plate.
3 Insert the extraction keys deeply into the slots on each side,
2 Remove the trim plate.
3 Insert the extraction keys deeply into the slots on each side,
then follow the arrows as shown on the illustration.
Installing the unit (in-dash mounting)
When installing without the mounting
sleeve
sleeve
1 Remove the mounting sleeve and trim plate from
the unit.
2 Align the holes in the unit (on both sides) with
the vehicle mounting bracket and secure the unit
with screws (supplied/commercially available).
with screws (supplied/commercially available).
Use only the specified screws. Using wrong screws
might damage the unit.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
illustrated before fitting.
INSTALLATION/CONNECTION
Part list for installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
(F) Screws (supplied for
)
ENGLISH
JS_KWD_KMM_BT522HD_KN_EN_9.indd 36
7/7/2017 11:25:02 AM