Kenwood DPX303MBT Owner's Manual
ENGLISH
25
BLUETOOTH®
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default: XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
“
*
” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
• You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
AUDIO SELECT
DEVICE DELETE
1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT
(0000)
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press
1 Turn the volume knob to select a number.
2 Press
S / T to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT
ON: The unit automatically reconnect when the last connected
Bluetooth device is within range. ; OFF: Cancels.
Bluetooth device is within range. ; OFF: Cancels.
AUTO PAIRING
ON: The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ; OFF: Cancels.
iPod touch/Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ; OFF: Cancels.
INITIALIZE
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
phonebook, and etc.). ; NO: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2
Search and select this unit model name (DPX7**/DPX59*/DPX54*/
DPX52*/DPX50*/DPX3***) on the Bluetooth device.
DPX52*/DPX50*/DPX3***) on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing
PAIRING: Pairing
status
HF CNT:
Hands-Free Profile (HFP) compatibility
AUD CNT:
Advanced Audio Distribution Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
to turn off the unit.
JS_KWD_DPX_793BH_KN_EN_3.indd 25
7/25/2017 10:40:04 AM