Kenwood DPX303MBT Owner's Manual
44
ENGLISH
SPECIFICATIONS
Tuner
FM
Frequency Range
/
/
/
/
:
87.9 MHz — 107.9 MHz (200 kHz space)
:
87.5 MHz — 108.0 MHz (50 kHz space)
Usable Sensitivity
(S/N = 30 dB, Dev 22.5 kHz)
(S/N = 30 dB, Dev 22.5 kHz)
8.2 dBf (0.71 μV/75 Ω)
Quieting Sensitivity
(S/N = 46 dB, Dev 40 kHz)
(S/N = 46 dB, Dev 40 kHz)
17.2 dBf (2.0 μV/75 Ω)
Frequency Response
(±3 dB)
(±3 dB)
HD Radio Broadcast:
20 Hz — 20 kHz
Conventional Broadcast: 30 Hz — 15 kHz
Signal-to-Noise Ratio
HD Radio Broadcast:
75 dB (STEREO)
Conventional Broadcast: 64 dB (MONO)
Stereo Separation (1 kHz)
40 dB
AM
Frequency Range
530 kHz — 1 700 kHz (10 kHz space)
Usable Sensitivity
(S/N = 20 dB)
(S/N = 20 dB)
29 dBμ (28.2 μV)
Frequency Response
(±3 dB)
(±3 dB)
HD Radio Broadcast:
40 Hz — 15 kHz
Signal-to-Noise Ratio
HD Radio Broadcast:
70 dB (STEREO)
TROUBLESHOOTING
Symptom
Remedy
Bluetooth®
“DEVICE FULL”
The number of registered devices has reached its limit. Retry
after deleting an unnecessary device.
( 25, DEVICE DELETE)
after deleting an unnecessary device.
( 25, DEVICE DELETE)
“N/A VOICE TAG”
Make sure the same voice as the registered voice tag is used.
“NOT SUPPORT”
The connected phone does not support Voice Recognition
feature or phonebook transfer.
feature or phonebook transfer.
“NO ENTRY”/“NO PAIR”
There is no registered device connected/found via Bluetooth.
“ERROR”
Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
the device supports the function you have tried.
“NO INFO”/“NO DATA”
Bluetooth device cannot get the contact information.
“HF ERROR XX”/
“BT ERROR”
“BT ERROR”
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
solve the problem, consult your nearest service center.
“SWITCHING NG”
The connected phones might not support phone switching
feature.
feature.
JS_KWD_DPX_793BH_KN_EN_3.indd 44
7/25/2017 10:40:09 AM