Alpine CDE-163BT Owner's Manual

-EN

By setting this item to ON, the unit will auto pair when an iPod/iPhone
is connected to this unit via the USB port.



Setting item: USB PAIR

Setting contents:

ON (Initial setting) / OFF

OFF:

Turn off the auto pair function.

ON:

Auto pair when an iPod/iPhone is connected to this unit via the
USB port.

Note

• USB Auto-Pairing cannot take place if either device has been paired

previously. Make sure the device name of both has been deleted
from each device.

Select one of 5 connected Bluetooth compatible devices that you
previously registered.



Setting item: PAIRED DEV

Turn the Rotary encoder to select a Bluetooth compatible
device you want to use (you want to change connection),
and then press

ENTER.

Turn the Rotary encoder to select “CONNECT”, then press
ENTER to connect the selected device.

The connected device is marked with “

l”. Select “DISCONNECT”

to disconnect this device. Select “CLEAR” when you want to clear
the device from the device list.

Notes

• If the connection is successfully changed, “CONNECTED” is displayed

for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.

• If a Smartphone is connected to this unit successfully, the

indicator

lights up to show the battery charge of the connected Smartphone. The

indicator blinks as a low level warning. The

indicator goes out

when the battery is drained. At this time, the Bluetooth function is
unavailable due to the Smartphone powered off.

• Depending on the connected Smartphone, the

(battery charge),

indicator may not be displayed.

• A total of 5 devices can be registered. If a 6th device is registered, the

earliest registered device will be deleted automatically.

You can set whether this unit can be recognized or not from a Bluetooth
compatible device.



Setting item: VISIBLE M

Setting contents:

ON (Initial setting) / OFF

Change these settings to improve the quality of the outgoing or
incoming call.



Setting item: CALL SOUND



Further setting items: SOURCE VOL / TYPE SET

Adjusting the volume (SOURCE VOL)

You can adjust the volume level of the Phone call, the ring tone and the
microphone input to fit your own preferences.

Setting contents:

PHONE TALK:

−5 dB ~ +5 dB

RING TONE:

−5 dB ~ +5 dB

MIC GAIN:

−5 dB ~ +5 dB

Note

• The initial setting of PHONE TALK / RING TONE / MIC GAIN is 0.

Sound Auto setting (TYPE SET)

Depending on your calling environment, choose one of the settings
below which gives the best sound quality.

Setting contents:

TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5

TYPE1:

Standard Mode (recommended)

TYPE2:

Enhances the noise reduction

TYPE3:

Enhances the echo-cancel

TYPE4:

Enhances both noise reduction and echo-cancel

TYPE5:

Weakens both noise reduction and echo-cancel

Note

• The functions below are designed to improve the sound quality of the

outgoing call.
Noise reduction: This function can reduce the road noise, but excessive
enhancement may affect the sound quality of the call.
Echo-cancel: This function can reduce the echo, but excessive
enhancement may affect the sound quality of the call.

You can choose whether to use this function according to the following
setting.



Setting item: CALLER ID

Setting contents:

ON (Initial setting) / OFF

If you want to keep the ID information of the caller from others, set this
item to OFF. Depending on the stored ID information, “UNKNOWN”
and telephone number will be displayed.

Setting the Auto Pairing with iPod/iPhone

Setting the Bluetooth Device

Setting the Visible Mode

Setting the Bluetooth sound quality

Setting the caller information display
ON/OFF