Sony RSX-GS9 Owner's Manual
26
GB
BLUETOOTH function cannot operate.
Turn off the unit by pressing OFF for more than 2
Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
No sound is output from the car speakers during
handsfree call.
If the sound is output from the cellular phone, set
handsfree call.
If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
car speakers.
SongPal operation
Application name is mismatched with the actual
application in “SongPal”.
Launch the application again from the “SongPal”
application in “SongPal”.
Launch the application again from the “SongPal”
application.
While running the “SongPal” application via
BLUETOOTH, the display automatically switches
to [BT Audio].
The “SongPal” application or BLUETOOTH
BLUETOOTH, the display automatically switches
to [BT Audio].
The “SongPal” application or BLUETOOTH
function has failed.
Run the application again.
The “SongPal” application is automatically
disconnected when the display switches to
[iPod1] or [iPod2].
The “SongPal” application on iPhone/iPod does
disconnected when the display switches to
[iPod1] or [iPod2].
The “SongPal” application on iPhone/iPod does
not support iPod playback.
Change the source of the unit to other than
Change the source of the unit to other than
[iPod1] or [iPod2], then establish the “SongPal”
connection (page 15).
connection (page 15).
Error displays/Messages
For USB device playback
Device Error: The USB device cannot be played.
Connect the USB device again.
Connect the USB device again.
No Device: A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
recognized.
Make sure the USB device or USB cable is securely
connected.
A USB device in MTP mode is not available.
Set the USB connection mode to MSC.
No Music: There is no playable file.
Connect a USB device containing playable files
Connect a USB device containing playable files
Check that the “Music” folder is located directly
under the root directory of the USB device and
that playable files are stored in the folder.
that playable files are stored in the folder.
No Output: Sound signals are not output from the
OPTICAL OUT terminal.
No sound is output from the OPTICAL OUT while
OPTICAL OUT terminal.
No sound is output from the OPTICAL OUT while
native DSD playback is performed via the USB
micro-B port.
micro-B port.
No Support: The USB device is not supported.
For details on the compatibility of your USB
For details on the compatibility of your USB
device, visit the support site on the back cover.
USB hubs are not supported.
Overload: The USB device is overloaded.
Disconnect the USB device, then press SRC to
Disconnect the USB device, then press SRC to
select another source.
The USB device has a fault, or an unsupported
device is connected.
Please Wait: Now reading information.
Wait until reading is complete and playback
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
depending on the file organization.
For BLUETOOTH function:
No Device: The BLUETOOTH device is not
connected or recognized.
Make sure the BLUETOOTH device is securely
connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
established with the BLUETOOTH device.
For SongPal operation:
APP List: The contents list of the USB is open.
Exit the list of the application to enable button
Exit the list of the application to enable button
operation.
APP Menu: A setting display of the application is
open.
Exit the setting display of the application to
open.
Exit the setting display of the application to
enable button operation.
Disconnect: The application is disconnected.
Make the “SongPal” connection (page 15).
Make the “SongPal” connection (page 15).
Open APP: The “SongPal” application is not
running.
Launch the application.
running.
Launch the application.
Settings: A sound setting, general setting or
BLUETOOTH setting display of the application is
open.
Exit the setting display of the application to
BLUETOOTH setting display of the application is
open.
Exit the setting display of the application to
enable button operation.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
consult your nearest Sony dealer.