Sony RSX-GS9 Owner's Manual
29
GB
*1 Not supplied
*2 RCA pin cord (not supplied)
*3 Depending on the type of car, use an adaptor for a
*2 RCA pin cord (not supplied)
*3 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*4 Whether in use or not, route the microphone input
cord such that it does not interfere with driving
operations. Secure the cord with a clamp, etc., if it is
installed around your feet.
operations. Secure the cord with a clamp, etc., if it is
installed around your feet.
*5 For details on installing the microphone, see
*6 When the amperage rating of the fuse used on your
car is 10 A, make the power connection to the
battery directly to avoid short circuits.
battery directly to avoid short circuits.
*7 When making the optical connection, an optical
cable (not supplied) is required.
*8 To connect a smartphone to the main unit, an
appropriate cable (not supplied) is required.
*9 To connect an iPod/iPhone, use the USB connection
cable for iPod (not supplied).
*10For details on the connection, see “Guide to Audio
*11 To secure the connectors, wrap the hook and loop
fastener
around the neck of connectors, then
bring the ends of the hook and loop fastener
together.
together.
To a common ground (earth) point
First connect the black ground (earth) lead, then
connect the yellow and red power supply leads.
connect the yellow and red power supply leads.
To the +12 V power terminal which is
energized at all times
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
To the +12 V power terminal which is
energized when the ignition switch is set to
the accessory position
If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
the accessory position
If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
To the power antenna (aerial) control lead or
the power supply lead of the antenna (aerial)
booster
It is not necessary to connect this lead if there is
no power antenna (aerial) or antenna (aerial)
booster, or with a manually-operated telescopic
antenna (aerial).
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers and a
power antenna (aerial). Connecting any other
system may damage the unit.
booster
It is not necessary to connect this lead if there is
no power antenna (aerial) or antenna (aerial)
booster, or with a manually-operated telescopic
antenna (aerial).
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers and a
power antenna (aerial). Connecting any other
system may damage the unit.
To a car’s illumination signal
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
lead to a common ground (earth) point.
When making the high level input
connection
connection
For details, see “High level input connection”
(page 30).
(page 30).
To the left speaker output (white) of an audio
device
To the right speaker output (gray) of an audio
device
When connecting to the battery directly
When the amperage rating of the fuse used on your
car is 10 A, make the power connection to the
battery directly to avoid short circuits.
car is 10 A, make the power connection to the
battery directly to avoid short circuits.
To a metal point of car
To the positive battery terminal
To the positive battery terminal
Notes
Despite connecting to the power supply lead of the
Despite connecting to the power supply lead of the
car, the unit may not fully provide its performance
due to insufficient power. In this case, make the
power connection to the battery directly.
due to insufficient power. In this case, make the
power connection to the battery directly.
Make sure that the car’s battery wires connected to
the car (ground (earth) to chassis) are of a wire gauge
at least equal to that of the main power wire
connected from the battery to the head unit.
at least equal to that of the main power wire
connected from the battery to the head unit.
If you have any questions or problems concerning
the connection, consult the dealer for details.
the connection, consult the dealer for details.
Recommended High-Resolution USB
Audio system
Audio system
Note
Certain products shown in the diagram may not be
available in your country or region.
Certain products shown in the diagram may not be
available in your country or region.
Making connections
Power amplifier
(e.g. XM-GS4)
(e.g. XM-GS4)
Super tweeter
(e.g. XS-GS1)
(e.g. XS-GS1)
RSX-GS9
(this unit)
(this unit)
Full-range speaker
(e.g. XS-GS1621)
(e.g. XS-GS1621)
Power amplifier
(e.g. XM-GS100)
(e.g. XM-GS100)
Subwoofer
(e.g. XS-GSW121D)
(e.g. XS-GSW121D)