JVC KD-R490 Owner's Manual
ENGLISH
15
AUDIO CONTROL
BASS BOOST
LEVEL +01 to LEVEL +05 (LEVEL +01): Selects your preferred bass
boost level. ; OFF: Cancels.
boost level. ; OFF: Cancels.
LOUDNESS
LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a
well-balanced sound at low volume. ; OFF: Cancels.
well-balanced sound at low volume. ; OFF: Cancels.
SUB.W LEVEL *
1
SPK-OUT *
2
SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the
output level of the subwoofer connected via speaker
lead. ( 24)
output level of the subwoofer connected via speaker
lead. ( 24)
PRE-OUT *
3
SUB.W –08 to SUB.W +08 (SUB.W 00): Adjusts
the output level of the subwoofer connected to the
lineout terminals (REAR/SW) through an external
amplifier. ( 24)
the output level of the subwoofer connected to the
lineout terminals (REAR/SW) through an external
amplifier. ( 24)
SUBWOOFER SET *
3
ON: Turns on the subwoofer output. ; OFF: Cancels.
SUBWOOFER LPF *
1
FRQ THROUGH: All signals are sent to the subwoofer. ;
FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W PHASE *
4
REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
output to be in line with the speaker output for optimum performance.
FADER
POSITION R06 to POSITION F06 (POSITION 00): Adjusts the front
and rear speaker output balance.
and rear speaker output balance.
BALANCE *
5
POSITION L06 to POSITION R06 (POSITION 00): Adjusts the left and
right speaker output balance.
right speaker output balance.
*
1
Displayed only when [SUBWOOFER SET] is set to [ON].
*
2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 16)
*
3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
( 16)
*
4
Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF].
*
5
This adjustment will not affect the subwoofer output.
AUDIO SETTINGS
Default: XX
EQ SETTING
PRESET EQ
Select a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/
TALK/USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/
TALK/USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE
EASY EQ
Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP *
• The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP *
1
*
2
: 00 to +06 (Default:
+03
SUB.W *
1
*
3
:
–08 to +08
00
BASS :
LVL–06 to LVL+06
LVL 00
MID :
LVL–06 to LVL+06
LVL 00
TRE :
LVL–06 to LVL+06
LVL 00)
PRO EQ
Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
• The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
1 BASS/MIDDLE/TREBLE: Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
2 Adjust the sound elements of the selected sound tone.
BASS Frequency
:
60HZ/80HZ/100HZ/200HZ
Level
:
LVL–06 to LVL+06
Q
:
Q1.0/Q1.25/Q1.5/Q2.0
(Default :
80HZ/LVL 00/Q1.0)
MIDDLE Frequency :
0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ
Level
:
LVL–06 to LVL+06
Q
:
Q0.75/Q1.0/Q1.25
(Default
:
1.0KHZ/LVL 00/Q1.25)
TREBLE Frequency :
10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ
Level
:
LVL–06 to LVL+06
Q
:
Q FIX
(Default
:
10.0KHZ/LVL 00/Q FIX)
JS_JVC_KD_R690S_K_EN_3.indd 15
7/4/2017 11:01:18 AM