JVC KD-R880BT Owner's Manual

ENGLISH

Pair and connect a Bluetooth device for the first time

Press

to turn on the unit.

Search and select “KD-R9

BTS”/“KD-R8

BT” on the Bluetooth device.

“BT PAIRING” flashes on the display.

• For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

Perform (A) or (B) depending on what appears on the display.

For some Bluetooth devices, pairing sequence may vary from the steps described below.

(A) “[Device Name]” “XXXXXX” “VOL – YES” “BACK – NO”

“XXXXXX” is a 6-digit passkey randomly generated during each pairing.

Ensure that the passkeys appear on the unit and Bluetooth device are the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “[Device Name]” “VOL – YES” “BACK – NO”

Press the volume knob to start pairing.

• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the

Bluetooth device.
You can change to a desired PIN code before pairing. ( 18)

• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.

“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when the
Bluetooth connection is established.

•  This unit supports Secure Simple Pairing (SSP).
•  Up to 10 devices can be registered (paired) in total.
•  Once the pairing is completed, the Bluetooth device will remain registered in the unit even if

you reset the unit. To delete the paired device, 18, [DEVICE DELETE].

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at

any time.

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the

device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)

Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)

Connect the microphone

* For KD-R880BT, connect to the microphone input jack.

( 35)

Adjust the microphone
angle

Secure using cord clamps
(not supplied) if necessary.

MIC (microphone input terminal)*

Microphone (supplied)

Rear panel

JS_JVC_KD_R980BTS_K_EN_4.indd 14

20/5/2016 2:22:44 PM