JVC KD-R880BT Owner's Manual
ENGLISH
34
How to remove the unit
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
(commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
the unit.
Installing the unit (in-dash mounting)
Do the required wiring.
( 35)
( 35)
Bend the appropriate tabs to hold
the sleeve firmly in place.
the sleeve firmly in place.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
plate as illustrated
before fitting.
Dashboard of
your car
your car
Part list for installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
Output terminals
For 2-way crossover setting
FRONT
REAR/SW
REAR/SW
: Front output
: Rear/subwoofer output
: Rear/subwoofer output
For 3-way crossover setting
FRONT
REAR/SW
REAR/SW
: Mid Range output
: Woofer output
: Woofer output
JS_JVC_KD_R980BTS_K_EN_4.indd 34
20/5/2016 2:22:55 PM