Dual DC535Bi Owner's Manual

19

Press and hold 

 for 3 seconds to disconnect a 

connected device. The device will remain paired and appear 
in the SEARCH menu, but not be connected. 

Press 

 once. “Enter Phone Number” appear on the 

display. Using the remote control, enter the phone number 
using the 0-9 buttons. Press 

 or SELECT on the remote 

control or front panel to begin dialing.

Note: Placing a phone call from your cell phone will also 
initiate Bluetooth function.

Press SELECT from Bluetooth mode to view recent calls 
dialed, received or missed while connected to the head unit. 
Turn the volume knob to cycle through the recent phone 
numbers. Press SELECT or 

 to dial the number. 

To redial the last phone number, press 

 two times from 

Bluetooth mode. Press 

 or SELECT again to redial the 

phone number. 

Incoming phone calls will automatically appear on the 
display and a ring tone will be heard.

Note: The volume of the ring tone depends on the volume 
level of the head unit and may not be heard if the volume is 
set to a low level or mute is activated.

• Press 

 to receive the incoming phone call.

• Press and hold 

 to refuse the incoming phone call.

Note: If Auto Answer is set to ON in the setup menu, all 
phone calls will be received automatically.
 
During an active phone call, press 

 to end a phone call. 

If the phone call was received when listening to music 
in another mode, the head unit will resume the previous 
mode. 

The head unit supports A2DP wireless streaming audio 
from a Bluetooth mobile device directly to your head unit. 
The following functions can be used to control the music:
• Press 

ll

 to skip to the next available audio track.

• Press 

nn

 to skip to the previous audio track.

• Press 

l

/ II to toggle between play and pause during 

   playback.