Sony CDX-G3205UV Owner's Manual
10
GB
Notes
• The activation process usually takes 10 to 15
minutes, but may take up to an hour.
• Your radio will need to be turned on and receiving
the SiriusXM signal to receive the activation
message.
message.
1
Press
(browse).
2
Rotate the control dial to select
[CHANNEL], then press it.
[CHANNEL], then press it.
3
Rotate the control dial to select the
desired channel, then press it.
desired channel, then press it.
To select channels from categories
1
1
Press
(browse).
2
Rotate the control dial to select [CATEGORY],
then press it.
then press it.
3
Rotate the control dial to select the desired
category, then press it.
category, then press it.
To store channels
1
1
While receiving the channel that you want to
store, press and hold a number button (1 to
6) until [MEM] appears.
store, press and hold a number button (1 to
6) until [MEM] appears.
To receive the stored channel, press MODE
to select [SX1], [SX2] or [SX3], then press a
number button (1 to 6).
to select [SX1], [SX2] or [SX3], then press a
number button (1 to 6).
To set a parental control
The parental control feature allows you to
limit access to SiriusXM channels with
mature content. When enabled, the parental
control feature requires you to enter a
passcode to tune to the locked channels.
Information on setting up the passcode and
locking channels can be found below.
limit access to SiriusXM channels with
mature content. When enabled, the parental
control feature requires you to enter a
passcode to tune to the locked channels.
Information on setting up the passcode and
locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [GENERAL]
[SXM PARENTAL]
[LOCK SELECT]
[LOCK-ON].
3
Enter the passcode by rotating the control
dial on the unit or pressing
dial on the unit or pressing
/ on the
remote commander.
To move the entry position, press SEEK +/– on
the unit or
To move the entry position, press SEEK +/– on
the unit or
/ on the remote commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [LOCK-OFF].
To change the passcode
1
1
Press MENU and rotate the control dial.
2
Select [GENERAL]
[SXM PARENTAL]
[CODE EDIT].
3
Enter the current passcode on the current
passcode input display, then press ENTER.
The initial passcode is [0000].
passcode input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Number (Default)
Channel Number (Default)
Channel Name
Artist Name Song Title Content Info
Category Name
Category Name
Clock
Selecting channels for SiriusXM