Sony MEX-N5200BT Owner's Manual
33
GB
Pairing failed due to a timeout.
Depending on the connecting device, the
Depending on the connecting device, the
time limit for pairing may be short.
– Try completing the pairing within the
– Try completing the pairing within the
time.
BLUETOOTH function cannot operate.
Turn off the unit by pressing OFF for more
Turn off the unit by pressing OFF for more
than 2 seconds, then turn the unit on
again.
again.
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular
during handsfree call.
If the sound is output from the cellular
phone, set the cellular phone to output
the sound from the car speakers.
the sound from the car speakers.
Siri Eyes Free is not activated.
Perform the handsfree registration for an
Perform the handsfree registration for an
iPhone that supports Siri Eyes Free.
Set the Siri function on the iPhone to on.
Cancel the BLUETOOTH connection with
the iPhone and the unit, and reconnect.
SongPal operation
Application name is mismatched with the
actual application in “SongPal”.
Launch the application again from the
actual application in “SongPal”.
Launch the application again from the
“SongPal” application.
While running the “SongPal” application
via BLUETOOTH, the display automatically
switches to [BT AUDIO].
The “SongPal” application or BLUETOOTH
via BLUETOOTH, the display automatically
switches to [BT AUDIO].
The “SongPal” application or BLUETOOTH
function has failed.
Run the application again.
The “SongPal” application is automatically
disconnected when the display switches
to [IPD].
The “SongPal” application on iPhone/iPod
disconnected when the display switches
to [IPD].
The “SongPal” application on iPhone/iPod
does not support iPod playback.
– Change the source of the unit to other
– Change the source of the unit to other
than [IPD], then establish the “SongPal”
connection (page 19).
connection (page 19).
Pandora® operation
Pandora® connection is not possible.
Shut down the Pandora® application on
Shut down the Pandora® application on
the mobile device, and then launch it
again.
again.
Messages
The following messages may appear or flash
during operation.
during operation.
CD ERROR: The disc cannot be played. The
disc will be ejected automatically.
Clean or insert the disc correctly, or make
disc will be ejected automatically.
Clean or insert the disc correctly, or make
sure the disc is not blank or defective.
CD NO MUSIC: There is no playable file. The
disc will be ejected automatically.
Insert a disc containing playable files
disc will be ejected automatically.
Insert a disc containing playable files
(page 27).
CD PUSH EJT: The disc could not be ejected
properly.
Press (eject).
properly.
Press (eject).
HUB NO SUPRT: USB hubs are not
supported.
supported.
INVALID
The selected operation could be invalid.
The selected operation could be invalid.
[USB MODE] cannot be changed during
iPod playback.
IPD STOP: iPod playback has finished.
Operate your iPod/iPhone to start
Operate your iPod/iPhone to start
playback.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA
A USB device not supporting AOA
(Android Open Accessory) 2.0 is
connected to the unit while [USB MODE] is
set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 22).
connected to the unit while [USB MODE] is
set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 22).
OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press SRC
Disconnect the USB device, then press SRC
to select another source.
The USB device has a fault, or an
unsupported device is connected.
READ: Now reading information.
Wait until reading is complete and
Wait until reading is complete and
playback starts automatically. This may
take some time depending on the file
organization.
take some time depending on the file
organization.
USB ERROR: The USB device cannot be
played.
Connect the USB device again.
played.
Connect the USB device again.