Alpine CDE-SXM145BT Owner's Manual
11
-EN
* The illustration is for CDE-SXM145BT/CDE-143BT.
Listening to Radio
1
Press SOURCE
to select TUNER mode.
2
Press BAND repeatedly until the desired radio band is
displayed.
displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3
Press TUNE
A.ME to select the tuning mode.
SEEK DX (Distance mode) SEEK LOCAL (Local mode)
MANUAL (Manual mode) SEEK DX
MANUAL (Manual mode) SEEK DX
Note
• The initial mode is Distance mode.
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or to tune in the desired station.
In Manual mode, holding down
or will change the
frequency continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the station.
preset buttons (1 through 6) into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press BAND repeatedly until the desired radio band is
displayed.
displayed.
2
Press and hold TUNE
A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND repeatedly until the desired band is
displayed.
displayed.
2
Press any one of the station preset buttons (1 through 6)
that has your desired radio station in memory.
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press
ENTER in Radio mode to activate Frequency
search mode.
The “
” indicator lights up.
2
Turn the Rotary encoder to select the desired frequency.
3
Press
ENTER to receive the selected frequency.
Note
• Press r in the search mode to cancel. Or, the search mode will be
canceled if no operation is performed for 60 seconds.
Radio
BAND
/ENTER
SOURCE/
TUNE/A.ME
Rotary encoder
Preset buttons
(1 through 6)