Kenwood DPX302U Owner's Manual

ENGLISH

17

Default: XX

Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.

1  Select a zone. (  16)
2  Select a color for the selected zone.
 

VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*

To make your own color, select [CUSTOM R/G/B]. The color you have 
made will be stored in [CUSTOM R/G/B].
1  Press the volume knob to enter the detailed color adjustment.
2 Press 

S / T to select the color (R/ G/ B) to adjust.

3  Turn the volume knob to adjust the level (0 — 9), then press the 

knob.

Dim the display illumination and button illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1  Turn the volume knob to adjust the [ON] time, then press the knob.
2  Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 6:00 PM; [OFF]: 6:00 AM)

1  Select a zone. (  16)
2  0 — 31: Select your preferred brightness level for display and button 

illumination.

AUTO/ ONCE: Select whether to scroll the display information 
automatically, or scroll only once. ; OFF: Cancels.

* Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/ 

BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/ 
GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/ 
ORANGERED

General

Sound cannot be heard.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

“MISWIRING CHECK WIRING 
THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals 
of the speaker wires are insulated properly. Turn the 
power on again.

“PROTECTING SEND SERVICE” 
appears.

Send the unit to the nearest service center.

The unit does not work at all.

Reset the unit. (  3)

Radio

•  Radio reception is poor.
•  Static noise while listening 

to the radio.

Connect the antenna firmly.

CD / USB / iPod

Disc cannot be ejected.

Press and hold 

M to forcibly eject the disc. Be careful 

not to drop the disc when it is ejected. If this does not 
solve the problem, reset the unit. (  3)

Noise is generated.

Skip to another track or change the disc.

Tracks do not play back as 
you intended them to play.

Playback order is determined when files are recorded.

“READING” keeps flashing.

Do not use too many hierarchical levels or folders.

Elapsed playing time is not 
correct.

This is caused by how the tracks are recorded.

Correct characters are not 
displayed (e.g. album name).

•  This unit can only display uppercase letters, 

numbers, and a limited number of symbols.

•  Depending on the display language you have 

selected (  5), some characters may not be 
displayed correctly.

JS_KWD_DPX302U_KN_EN_5.indd   17

20/10/2015   11:13:12 AM