Sony MEX-M70BT Owner's Manual

Page of 42
9
GB
4
Select [Sony Car Audio] shown in the 
display of the BLUETOOTH device.
If [Sony Car Audio] does not appear, repeat from 
step 2.
5
If passkey* input is required on the 
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,” 
“PIN number” or “Password,” etc., depending on 
the device.
When pairing is made, 
 stays lit.
6
Select this unit on the BLUETOOTH device 
to establish the BLUETOOTH connection.
 or 
 lights up when the connection is 
made.
Note
While connecting to a BLUETOOTH device, this unit 
cannot be detected from another device. To enable 
detection, enter the pairing mode and search for this 
unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode after this 
unit and the BLUETOOTH device are paired.
To use a paired device, connection with this unit is 
required. Some paired devices will connect 
automatically.
1
Press CALL, rotate the control dial to 
select [BT SIGNL], then press it.
Make sure that 
 lights up.
2
Activate the BLUETOOTH function on the 
BLUETOOTH device.
3
Operate the BLUETOOTH device to 
connect to this unit.
 or 
 lights up.
Icons in the display:
To connect the last-connected device from 
this unit
Activate the BLUETOOTH function on the 
BLUETOOTH device.
Press SRC.
Select [BT PHONE] or [BT AUDIO].
Press ENTER to connect with the cellular phone, or 
PAUSE to connect with the audio device.
Note
While streaming BLUETOOTH audio, you cannot 
connect from this unit to the cellular phone. Connect 
from the cellular phone to this unit instead.
Tip
With BLUETOOTH signal on: when the ignition is turned 
to on, this unit reconnects automatically to the last-
connected cellular phone.
To install the microphone
For details on how to connect the microphone, refer 
to the supplied “Installation/Connections” guide.
By touching the control dial on the unit with an 
NFC* compatible smartphone, the unit is paired and 
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology 
enabling short-range wireless communication 
between various devices, such as mobile phones and 
IC tags. Thanks to the NFC function, data 
communication can be achieved easily just by 
touching the relevant symbol or designated location 
on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower 
installed, downloading the app “NFC Easy Connect” 
available at Google Play™ is required. The app may 
not be downloadable in some countries/regions.
1
Activate the NFC function on the 
smartphone.
For details, refer to the operating instructions 
supplied with the smartphone.
Connecting with a paired BLUETOOTH 
device
[0000]
Input passkey
Lights up when a cellular phone is 
connected to the unit.
Lights up when an audio device is 
connected to the unit.
Indicates the signal strength status of 
connected cellular phone.
Connecting with a Smartphone by One 
touch (NFC)