Bazooka CSA-2 Owner's Manual
HIGH LEVEL INPUT
FILTER
HPF/FULL
REMOTE
SPEAKER OUTPUT
BAZOOKA
+
-
+
-
+
-
(4 Ohm Minimum)
(4 Ohm Minimum)
(4 Ohm Minimum)
Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass
response. When connecting, make sure that positive (+) from the amplifier is connected to the positive (+) of
the speaker, and the same for negative (-).
response. When connecting, make sure that positive (+) from the amplifier is connected to the positive (+) of
the speaker, and the same for negative (-).
Eight wires from the harness are used to connect four speakers (4 ohm each). If you decide to use only two
speakers, tape the unused wires so they do not come in contact with each other or chassis ground.
speakers, tape the unused wires so they do not come in contact with each other or chassis ground.
S
PEAKER CONNECTIONS
WHITE/BLACK = L-
WHITE/BLACK = L-
WHITE = L+
WHITE = L+
GRAY = R+
GRAY/BLACK = R-
11
+
-
(4 Ohm Minimum)
GRAY = R+
GRAY/BLACK = R-